Planned Maintenance on ships

The Australian Maritime Safety Authority (AMSA) issued a marine notice on their current focus on maintenance during Port State Control Inspections.

 

Recent incidents have demonstrated the potentially serious consequences of a lack of effective maintenance of main engines and power generation systems that can pose serious risks to the safe and pollution-free operation of vessels.   In response to this, AMSA will immediately increase focus on planned maintenance during routine Port State Control inspections.

 

AMSA recognizes that a number of factors presented challenges to effective maintenance during the COVID-19 pandemic restrictions.  These include supply chain difficulties in getting necessary parts and specialist expertise to affected vessels.

 

However, with travel restrictions and quarantine requirements now largely removed in Australia, AMSA expects operators to resume supply of necessary spares and provide support and expertise such as class surveyors, specialist technicians, company representatives etc. AMSA recognizes that there are still supply chain issues which can delay the provision of spare parts. However, these issues are now well known, and AMSA expects that operators anticipate these challenges and make advance provision in planning maintenance to minimize impact.

 

Inspections

During Port State Control inspections, AMSA will place a greater focus on planned maintenance of propulsion and auxiliary equipment and associated systems and will take necessary compliance actions to address any identified areas of concern. This may include the physical attendance of classification society surveyors to verify the condition of critical equipment and its suitability to continue to function under all voyage conditions to maintain safe operations.

 

Operators should note that this is not a Focused Inspection Campaign (FIC) or Concentrated Inspection Campaign (CIC) of limited duration. It is a sustained focus on an identified area of concern that is part of AMSA’s data driven and risk-based approach to our PSC inspection regime.

 

ISM Code

Maintenance of the ship and equipment is a requirement of the ISM Code, including that:

• maintenance inspections are held at appropriate intervals
• any non-conformity is reported, with its possible cause, if known
• appropriate corrective action is taken, and
• records of these activities are maintained.

 

In relation to maintenance, the ISM Code specifies that the vessel’s Safety Management System (SMS) should:

• identify equipment and technical systems that would cause hazardous situations if they were to suddenly fail, and
• provide for specific measures (i.e. regular testing of all equipment including stand-by equipment or systems that are not in continuous use) to ensure the continued reliability of such equipment or systems

 

Maintenance activities need to be properly resourced, and procedures must be documented

Source: https://www.amsa.gov.au/about/regulations-and-standards/102022-planned-maintenance-ships